Mahindra 3510 maintenance

[jimmycrouch]

I have inherited a Mahindra 3510 and have little to no knowledge about this tractor. The items that I need help on are the following:
1. How to check the fluid levels for oil, hydraulic and transmission?
2, How to engage the PTO? I have a digger attachment, but cant get the PTO to engage.

I have found two fluid indicator sticks on the back of the tractor. I am assuming that these are for the hydraulic and transmission? I do not see a place to fill either fluid?Can someone help me with this? Maybe a video or similar?

Thank you.

 

[seville009]

Owners manual pdf

http://www.tym.co.kr/spectree/configs/data_lib/board/board_data/2/20181127/8ea4ba9d5d44c066b3ca89ebe3d4ea1f_cover.pdf

 

[jimmycrouch]

Thank you. That is very helpful! I have a lot of reading to do!

 

[jimmycrouch]

Are the levers shown as B and A in the photo used to drop the digger attachment (B) and spin the digger attachment(A)?

 

[skipmarcy]

Those are the rear remote control levers to operate whatever implement you have attached to the hydraulic connectors above the 3 pt hitch. My 4110 came with only one set and uses the lever closest to the seat. I tried for YEARS to get the components from Mahindra for the second set and they could never source them for me so I could have 2 sets of remotes. If your tractor has both, feel extremely lucky !!

 

[arrow]

The pto shaft is what creates the spinning.
You should have two switches plus a lever to engage the pto.
Both of these switches need to be "on" or else the shaft will not turn.