M8540 PTO Shaft Replacement

   / M8540 PTO Shaft Replacement #1  

derekuk101

Bronze Member
Joined
Mar 27, 2008
Messages
80
Location
KY
Tractor
M5-111, M8540, M4900, Ford 3600
Has anyone had the pleasure of replacing the PTO shaft on a 8540 or 9540? Looking to see if its a job we can do or if it needs to go to a shop. If anyone's had one replaced at a shop what did it run you?

A pto shaft sliding off from a batwing bushhog did the damage. We've filled and filled on the tractor shaft, but we can't get the new one on.

Thanks for any help.
 
   / M8540 PTO Shaft Replacement
  • Thread Starter
#3  
How hard is it to remove the shaft from the housing? I'm sure we could get the housing off.
 
   / M8540 PTO Shaft Replacement #4  
How hard is it to remove the shaft from the housing? I'm sure we could get the housing off.

Not as large a tractor as M8540 but I replaced the broken pto shaft on my M4900 and pto assembly resembles 8540 but not as large. After unbolt interior plate on assembly shaft was relatively easy to replace then re-install plate and assembly. Sure wasn't difficult enough that I'd want to send tractor to dealer to pay $100 per hour for who knows how many hrs. PTO operated many hrs after that without a problem when I traded M4900 for a M7040
 

Tractor & Equipment Auctions

toro turf sweeper (A50324)
toro turf sweeper...
Club Car Electric Golf Cart (A51694)
Club Car Electric...
Redirective Crash Cushion Guardrail (A51692)
Redirective Crash...
TOW BEHIND FINISH MOWER (A50324)
TOW BEHIND FINISH...
John Deere 5090E Tractor with Loader Prep Package, 2 Rear Remotes, Warranty Until 2028 (A52748)
John Deere 5090E...
2011 Chevrolet Impala Sedan (A51694)
2011 Chevrolet...
 
Top