M7040 "hissing" noise from under seat?

   / M7040 "hissing" noise from under seat? #71  
Your exactly right! I will show them how it handles it when I'm mowing my hills with my duals on lol
I will post pics for the "safety patrol"

Batwing and duals,they are going to have a field day with that:laughing:
 
   / M7040 "hissing" noise from under seat? #73  
Thank you! And at 4.27feet per pro HP I wouldn't at all say that is "hugely oversized"

I think your math is incorrect. 4.27 X 65 =277.55. I think you meant 4.33 HP per foot of cut
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#74  
That's right, I was figuring it at 64 pto HP instead of 65
 
   / M7040 "hissing" noise from under seat? #75  
That's right, I was figuring it at 64 pto HP instead of 65

So is all the math adding up to your tractor being properly sized to the needs of the Woods HD315? I'm just curious- I didn't realize your Kubota was as high HP as it is, looks smaller in your avatar. Obviously you can run what you want - I thought there might be a correlation to the size of the batwing and the noise issue of your K'bota.
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#76  
Yeah the math is close enough to not matter, that's ok just a simple misunderstanding
 
   / M7040 "hissing" noise from under seat? #77  
The thing that would concern me if it was my tractor is my M7040 operators manual states "dual wheels aren't approved"
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#78  
Not a problem at all, there are a lot smaller tractors with duals on, the manual also says to not use 2 hydraulic funtions at the same time, grease everything every ten hours...... I guess some people stop in the middle of a field to grease up instead of doing it before getting started
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#79  
There are also3 other M7040's in my area that run duals with no problem at all
 
   / M7040 "hissing" noise from under seat? #80  
Not a problem at all, there are a lot smaller tractors with duals on, the manual also says to not use 2 hydraulic funtions at the same time, grease everything every ten hours...... I guess some people stop in the middle of a field to grease up instead of doing it before getting started

It's your tractor so you can run duals if you chose. Irregardless to what you think duals put more strain on the axles & brgs. It's your nickle so drive on. What page in operators manual does it state not to use 2 hyd functions at the same time??
 

Tractor & Equipment Auctions

2012 GALLEGOS TRAILER 130BBL VAC TRAILER (A50854)
2012 GALLEGOS...
2017 FREIGHTLINER M2 S/A SWEEPER TRUCK (A51406)
2017 FREIGHTLINER...
1982 TANDEM AXLE CEMENT MIXING TRAILER (A50854)
1982 TANDEM AXLE...
2009 PETERBILT 340 (A50854)
2009 PETERBILT 340...
PALLET OF (2) THERMOKING TRI PAC UNITS (A50854)
PALLET OF (2)...
2005 INTERNATIONAL 4300 CARGO TRUCK (INOPERABLE) (A50854)
2005 INTERNATIONAL...
 
Top