M7040 "hissing" noise from under seat?

   / M7040 "hissing" noise from under seat? #71  
Your exactly right! I will show them how it handles it when I'm mowing my hills with my duals on lol
I will post pics for the "safety patrol"

Batwing and duals,they are going to have a field day with that:laughing:
 
   / M7040 "hissing" noise from under seat? #73  
Thank you! And at 4.27feet per pro HP I wouldn't at all say that is "hugely oversized"

I think your math is incorrect. 4.27 X 65 =277.55. I think you meant 4.33 HP per foot of cut
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#74  
That's right, I was figuring it at 64 pto HP instead of 65
 
   / M7040 "hissing" noise from under seat? #75  
That's right, I was figuring it at 64 pto HP instead of 65

So is all the math adding up to your tractor being properly sized to the needs of the Woods HD315? I'm just curious- I didn't realize your Kubota was as high HP as it is, looks smaller in your avatar. Obviously you can run what you want - I thought there might be a correlation to the size of the batwing and the noise issue of your K'bota.
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#76  
Yeah the math is close enough to not matter, that's ok just a simple misunderstanding
 
   / M7040 "hissing" noise from under seat? #77  
The thing that would concern me if it was my tractor is my M7040 operators manual states "dual wheels aren't approved"
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#78  
Not a problem at all, there are a lot smaller tractors with duals on, the manual also says to not use 2 hydraulic funtions at the same time, grease everything every ten hours...... I guess some people stop in the middle of a field to grease up instead of doing it before getting started
 
   / M7040 "hissing" noise from under seat?
  • Thread Starter
#79  
There are also3 other M7040's in my area that run duals with no problem at all
 
   / M7040 "hissing" noise from under seat? #80  
Not a problem at all, there are a lot smaller tractors with duals on, the manual also says to not use 2 hydraulic funtions at the same time, grease everything every ten hours...... I guess some people stop in the middle of a field to grease up instead of doing it before getting started

It's your tractor so you can run duals if you chose. Irregardless to what you think duals put more strain on the axles & brgs. It's your nickle so drive on. What page in operators manual does it state not to use 2 hyd functions at the same time??
 

Tractor & Equipment Auctions

(INOP) CATERPILLAR TL943 TELESCOPIC FORKLIFT (A50459)
(INOP) CATERPILLAR...
2021 John Deere 5045E  Only 86 Hours, Loader Ready, 2WD, Canopy (A51039)
2021 John Deere...
2022 FREIGHTLINER M2 24FT BOX TRUCK (A51222)
2022 FREIGHTLINER...
2024 CATERPILLAR 255 SKID STEER (A51242)
2024 CATERPILLAR...
2015 JOHN DEERE 5100M TRACTOR (A51243)
2015 JOHN DEERE...
MEGGER EZ THUMP (A50854)
MEGGER EZ THUMP...
 
Top