Lw6 frame mount

[DwayneB]

Anyone have or can take a few pictures of an LW6 or LW7 subframe mounting system? I'd like to make one for my TS354c but, I need to see where and how the thing connects to the hoe and tractor.

 

[DwayneB]

Anyone have or can take a few pictures of an LW6 or LW7 subframe mounting system? I'd like to make one for my TS354c but, I need to see where and how the thing connects to the hoe and tractor.

 

[Ranch_Hand_Supp]

DwayneB,

You can send me an email through my web site with your email address and I will send you some Pic's

www.ranchhandsupply.com

Ronald
Ranch Hand Supply

 

[Ranch_Hand_Supp]

DwayneB,

You can send me an email through my web site with your email address and I will send you some Pic's

www.ranchhandsupply.com

Ronald
Ranch Hand Supply

 

[DwayneB]

Thanks, I really appreciate you taking the time to do this!! email sent.

 

[DwayneB]

Thanks, I really appreciate you taking the time to do this!! email sent.

 

[Ranch_Hand_Supp]

Pic's on the way.....................


Ronald
Ranch Hand Supply

 

[Ranch_Hand_Supp]

Pic's on the way.....................


Ronald
Ranch Hand Supply

 

[psj12]

Ranch Hand. Do you sell these sub frame mounts? How about for Kama 554?

 

[psj12]

Ranch Hand. Do you sell these sub frame mounts? How about for Kama 554?

 

[Ranch_Hand_Supp]

No I don't sell the China Hoe's, Sorry. Just work on them.

I only sell the Korean Back Hoes and the Koyker Back Hoe's and Loaders.

Ronald
Ranch Hand Supply

 

[Ranch_Hand_Supp]

No I don't sell the China Hoe's, Sorry. Just work on them.

I only sell the Korean Back Hoes and the Koyker Back Hoe's and Loaders.

Ronald
Ranch Hand Supply

 

[MrFixit]

If my wife caught me working on a couple chinese Hoes, she'd cut off my Front End Loader

 

[MrFixit]

If my wife caught me working on a couple chinese Hoes, she'd cut off my Front End Loader

 

[Ranch_Hand_Supp]

I hear ya lol ............. I got to work on something though.

Wife, never been able to afford that luxury yet .... plus I don't think I would use my loader as much either.

Them China Hoes don't cost a hole lot.

Ronald
Ranch Hand Supply

 

[Ranch_Hand_Supp]

I hear ya lol ............. I got to work on something though.

Wife, never been able to afford that luxury yet .... plus I don't think I would use my loader as much either.

Them China Hoes don't cost a hole lot.

Ronald
Ranch Hand Supply

 

[Stimw]

I just modified a Jinma sub frame to fit a Branson 3510. I bought a YW-6 hoe and am adapting it to my Branson. Basicly I cut the rear 2' off the sub frame and added 2" X 3" tubing to the sides and made new front brackets.
Haven't got it hooked up yet, still working on the plumbing. Dealing with the metric fittings and best way to hook up to Branson hydraulics..
I did a google for Jinma Backhoe and found a site that showed having to beef up the sub frame to make it useable. They added box tubing to the under side. The frame I got would not have worked very well. It looked too weak at the rear attach pins.

 

[Stimw]

I just modified a Jinma sub frame to fit a Branson 3510. I bought a YW-6 hoe and am adapting it to my Branson. Basicly I cut the rear 2' off the sub frame and added 2" X 3" tubing to the sides and made new front brackets.
Haven't got it hooked up yet, still working on the plumbing. Dealing with the metric fittings and best way to hook up to Branson hydraulics..
I did a google for Jinma Backhoe and found a site that showed having to beef up the sub frame to make it useable. They added box tubing to the under side. The frame I got would not have worked very well. It looked too weak at the rear attach pins.