Backhoe LW-6

[orville]

I have a LW-6 that I got new back in 2008. One of my boom cylinders has blown the piston seals. The book shows the cylinder part number as LW-6.03.011. Does anyone know where I can find the seals online? Everywhere I look they want to sale the whole backhoe.

 

[Affordable]

We have some kits but they are not marked with a part number, if you can measure the cylinder rod in mm,I can check the kits we have

e-mail me the information tommy@affordabletractorsalesco.com



Tommy
Affordable Tractor Sales Co.
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[orville]

I used a magnifying glass and found these numbers on the seal.

UN 53 63 10

I did not see them before....(me old):confused2:

 

[Bob Rooks]

If at all possible get the new style cup seals, they are opaque in color and very tough. I think I got them from Tommy back when I still had my LW-6.

 

[orville]

I did find this if it helps.....

Article # UN053063 / 2

Description name, POLYURETHANE 53X63X10/11 COLLAR

Long, 53

Width, 63

High, 10

Family, 0070010101

 

[orville]

If at all possible get the new style cup seals, they are opaque in color and very tough. I think I got them from Tommy back when I still had my LW-6.

I emailed Tommy and he did not have the piston seals. Do you still have the part number when you got your seals. I keep sending everyone the numbers on the seals, but no one can help.

 

[Rich Waugh]

With most seals, those numbers would indicate the inside diameter (53 mm),outside diameter (63 mm), and height, or thickness of the seal (10 mm). You should be able to go to MSC Industrial Supply, McMaster-Carr or the like and fine a comparable seal in their selection of hydraulic cup seals. I fit fits it should work.

Rich