Buying Advice LS vs TYM vs Kioti

[Torvy]

Love my LS got it for a GREAT price with 20hrs onit. Parts and hard to find until you realize how many other tractor manufactures are made BY LS and the the parts thing is very very good.

example - Case and New Holland

To be fair, CaseIH and New Holland are really the same brand, too (especially for compacts). That is still weird to me because when dad was in the business, IH was the big brand and Case and NH mostly sold implements and specialty equipment.

 

[coobie]

So....a 20ft trailer w/ a TYM T25 with loader and Rotary cutter is gonna weigh more than 11,000 pounds that my truck is rated to pull?????
Yeah..right

You have to realize 5030 is the MAN.. and has pi$$ poor advice 99% of the time.

 

[Torvy]

You have to realize 5030 is the MAN.. and has pi$$ poor advice 99% of the time.

Don't use a truck with a Japanese nameplate, but use not 1, but 2 Kubotas.

 

[Handloader109]

I'll throw my 2 cents in, hope the poster makes a good decision, yes, dealer is way more important than a thousand or two you originally paid. In 4 or 5 or 6 years when the tractor has an issue you can't fix, that money is longforgotten.

Get as big as you can afford with ONLY your money. If you make some money with it fine, otherwise, rent for your need and forget buying until you can really afford it. Hoping to start a business is setting yourself up to fail. How many customers do you really think need you vs. whomever they currently use?

And towing. Sure an f150 dog or any other half ton can get up to speed with a 10 or 15k load. It is a false narrative . The one and only issue is can you stop the dang thing in less than a mile? Safely stop without sway, without jackknifing from a highway speed in less than 150% over empty? No you can't if you don't have your dang trailer brakes hooked up and working correctly. And no, that new f150 ain't better than my old f250. Pulling is only 10% of towing.

 

[DrAsus]

To throw a monkey wrench into this.....
What say ye about a JD3025e vs LS MT225HE??

From what I can tell....JD weighs a tad more..but the LS lifts more! One disappointment with the LS is the PTO HP...I've seen 17. 2 to 19.6 values for its PTO HP.

3025e PTO HP is 20.7

So regardless of the correct value..JD gets the win.

Thanks

 

[jyoutz]

I'll throw my 2 cents in, hope the poster makes a good decision, yes, dealer is way more important than a thousand or two you originally paid. In 4 or 5 or 6 years when the tractor has an issue you can't fix, that money is longforgotten.

Get as big as you can afford with ONLY your money. If you make some money with it fine, otherwise, rent for your need and forget buying until you can really afford it. Hoping to start a business is setting yourself up to fail. How many customers do you really think need you vs. whomever they currently use?

And towing. Sure an f150 dog or any other half ton can get up to speed with a 10 or 15k load. It is a false narrative . The one and only issue is can you stop the dang thing in less than a mile? Safely stop without sway, without jackknifing from a highway speed in less than 150% over empty? No you can't if you don't have your dang trailer brakes hooked up and working correctly. And no, that new f150 ain't better than my old f250. Pulling is only 10% of towing.

Nailed it

 

[Torvy]

To throw a monkey wrench into this.....
What say ye about a JD3025e vs LS MT225HE??

From what I can tell....JD weighs a tad more..but the LS lifts more! One disappointment with the LS is the PTO HP...I've seen 17. 2 to 19.6 values for its PTO HP.

3025e PTO HP is 20.7

So regardless of the correct value..JD gets the win.

Thanks

You know why JD is not on the list? Because for the same money, the 3025e is a toy compared to what you can get from Kioti, LS or TYM. It is not like the JD is merely a few hundred or even a couple of thousand more.

 

[arrow]

To throw a monkey wrench into this.....
What say ye about a JD3025e vs LS MT225HE??

From what I can tell....JD weighs a tad more..but the LS lifts more! One disappointment with the LS is the PTO HP...I've seen 17. 2 to 19.6 values for its PTO HP.

3025e PTO HP is 20.7

So regardless of the correct value..JD gets the win.

Thanks

This depends on usage.
The JD is comprised of plastic fenders, hood and floor board.
It also utilizes aluminum casing for its gear box.
If one is just cutting grass or smoothing out a road or grooming out a paddock or just plowing snow, it has its advantages in a suburban venue.
If one is using a tractor for the brutality of woods work such as logging in dense and ground obstructed terrain, then it fails woefully short.
The woods break skidders let alone stuff made of plastic and I do not care how strong one thinks the plastic is.
My fenders are made of steel but the outer portion is plastic for aesthetics I guess. I have replaced 3 of those fender liners already and they aren't cheap. My primary job for my machine is skidding.
Get high centered on a rock and resting on an aluminum gear case, I'd be concerned.
If I did get a JD for what I do, I would have to build skid plates for its entire length.

JD has cheapened this line of tractor from the original form of the 750, 770 and 790 series to such an extent, along with jacking up prices for lesser material, as to be called sinful.

 

[tacticalturnip]

The 3E series is... underwhelming, extraordinarily underwhelming.

There are plenty of people that own them, and enjoy them; more power to those folks, everyone should get every bit of enjoyment you can squeeze out of machine operation. That said, until they bring it up to par with the Kubota L02, Kioti CK20, TYM 15 series, Massey 18E, or even the the Mahindra 1600 series, I wouldn't touch one. I, personally, think the LS MT225E could also use an update, but it's not as far behind ergonomically as the Deere, it desperately needs more operator room. Well, to my tall, fat butt anyhow.

Now, the 3R series, I like them a lot, but that's a whole different animal.

 

[DrAsus]

The 3E series is... underwhelming, extraordinarily underwhelming.

There are plenty of people that own them, and enjoy them; more power to those folks, everyone should get every bit of enjoyment you can squeeze out of machine operation. That said, until they bring it up to par with the Kubota L02, Kioti CK20, TYM 15 series, Massey 18E, or even the the Mahindra 1600 series, I wouldn't touch one. I, personally, think the LS MT225E could also use an update, but it's not as far behind ergonomically as the Deere, it desperately needs more operator room. Well, to my tall, fat butt anyhow.

Now, the 3R series, I like them a lot, but that's a whole different animal.

Reason I throw the Deere in the mix, besides having 2 close dealers..and a 3rd dealer about an hour away..and the fact that you'll always get parts for them is I have a buddy, actually 2 different friends that have 3038e models. 1 friend uses it for his business...bush hogging...grading driveways...spreading gravel....and he borderline abuses the thing! Only busted each front loader hydraulic cylinder 2 different times. One under warranty replaced...and the 2nd was his fault he admits as he was attempting to pick up more than he should.
Other friend is clearing his 20 acres getting ready to build his house. The logs that his machine move with the grapple is impressive to say the least.


I get it. JD has a cult following almost..lol. Spec sheet...I can decimate most Jds with the competition. Ls, kioti, Tym lift more...weigh more...cost less etc etc. But with all that said...Jds get the job done. Period.
I think theybhave a promotion for the 3025D..gear drive for 19,999. The 3025e is 22k I believe. I want a hydrostat so kids and wife can drive it much easier. Both prices include front end loader.

LS MT225HE I can get for about 19k that is a hydrostat..so 3k less that 3025e and it lifts more..1600 v 1200 approx. A 25HP tractor is better than no tractor....and no emission crap to deal with.
However, I am my worst own enemy as I don't want buyers remorse and will go back and forth over this and that. Really good price for 25hp...vs wanting more PTO Hp for tilling etc.

Not having a kioti dealer close is hurting my decision..cause their CK line look to be the best bang for the buck by a long shot. So here comes LS..which is thousands less expensive.....but I still have reservations about them for some reason. I don't know why....my pastor has an LS...buddy at work...another friend has LS...all of them love them.

Sorry for the long post....