LS MT 2XXX Models with LB1300 Backhoe have swivel seat problems?

[Mrsig]

Any one with the MT 2XXX models with LB1300 Backhoe have swivel seat problems?

This is the 2nd time the X bars broke on me. The first time I was moving wood with the grapple and the seat shifted right and would not lock down.

On Thursday I was using the Backhoe and the seat tilted forward & to the left & I had a hell of a time to get it up and rotate it so I could drive it out of the wood & back home. Now all you can see is the sky when you drive it.

Dealer said it should take about a week to get the new seat frame assemble. Can't use the tractor at all the way it is.

No I am not over weight for the seat!

 

[tacticalturnip]

That's quite frustrating, and the reason I can't stand swivel seats.

 

[Mrsig]

It took 13 days and the new frame the bars look bigger then the last ones.

 

[Williy]

You can't weld some reinforcing rods on
the original seat? It could be a spare???

willy

 

[tacticalturnip]

It took 13 days and the new frame the bars look bigger then the last ones.

Good to see that they're trying to improve the part.

 

[ttrombet]

I have had a similar problem...I'm on seat #3. This time I re-welded the underside more thoroughly...it has been holding since. Unfortunately, I have to yank the seat up manually when using the backhoe...I'm waiting on a new design from LS but they are not much help on a more permanent solution.

 

[jasontdi]

Mine broke, too. Much more through weld on the replacement. Took 5 months to get it...

 

[ttrombet]

I've been waiting for a long time for a replacement as well. A long, long, time.

 

[ttrombet]

I love the tractor but the Customer Service is incredibly bad.

 

[jasontdi]

I've been waiting for a long time for a replacement as well. A long, long, time.

Pull it off take it to a welder and weld up the broken welds at the pivot points at least you'll be able to use it without feeling like you're going to fly off the tractor on any kind of an incline