LS GX3032 Loader Control Issues

[texascedar]

This unit is about 18 months old with 354 hrs. I use bucket, grapple rake and tree puller on the FEL.

Recent problem with the joystick cables coming unscrewed at the ball joints were fixed by dealer after 3 tries.

I go out today and the loader lifts, lowers, curls but will not roll the quick attach plated. The hoses to the front cylinders pressurize but only extend about 2 inches.

What are some causes for this problem?

Thanks

 

[texascedar]

Didn't see a delete button for this post.

Got my answer from another thread. Two months ago I had a new clutch installed. they had to remove the FEL. I didn't there were mid quick connectors as this is my 1st FEL and I never removed it. Guess when the dealer hooked it back up one of the connectors wasn't totally connected. Weird because I have used it for 9 hours since I got it back from the dealer. One thing, where the connectors are located there is a cluster of hoses and quick connectors that were bound together with a large nylon zip tie. Guess the pressure from the zip tie keep the connector from fully disconnecting until now.

Any way thanks to this forum I am back in business.