Loose draft control cylinder bolts?

   / Loose draft control cylinder bolts? #1  

Russcript

New member
Joined
Jul 19, 2024
Messages
2
Tractor
Kioti DK50 hst
Hey all, I was doing a little mowing and plowing with my DK50 and the draft control seemed to be a little jerky, when I checked it out I noticed that the 2 nuts at the draft cylinders were loose enough that the top link bracket can separate a hair from the cylinder and seems to be a bit loose. The problem is, the bolts spin freely and without knowing if they are supposed to be tight, I don’t know of this is normal or not. I’m thinking of stopping by a dealership and checking out a new one.
IMG_1913.jpeg
 
   / Loose draft control cylinder bolts? #2  
Those bolts just put some preload on the spring. Basically, you hold it with the flat head screw driver and tighten the nut with a wrench till it's just snug without any play.

Maybe this picture helps you understand a little bit better what's going on:

1721395357071.png
 
   / Loose draft control cylinder bolts?
  • Thread Starter
#3  
Thanks, I figured it was something like that but I didn’t want to screw something up without knowing what the normal tension was, I’ll try to tighten them a bit before I go back to work
 

Tractor & Equipment Auctions

2007 Toyota Camry Sedan (A50324)
2007 Toyota Camry...
2015 JOHN DEERE 310K BACKHOE (A51406)
2015 JOHN DEERE...
HOME MADE SMOKER / FRYER TRAILER (A52472)
HOME MADE SMOKER /...
2015 Jeep Compass AWD SUV (A50324)
2015 Jeep Compass...
2022 Club Car Tempo Golf Cart (A51694)
2022 Club Car...
2011 Hyundai Sonata Sedan (A50324)
2011 Hyundai...
 
Top