Loose draft control cylinder bolts?

   / Loose draft control cylinder bolts? #1  

Russcript

New member
Joined
Jul 19, 2024
Messages
2
Tractor
Kioti DK50 hst
Hey all, I was doing a little mowing and plowing with my DK50 and the draft control seemed to be a little jerky, when I checked it out I noticed that the 2 nuts at the draft cylinders were loose enough that the top link bracket can separate a hair from the cylinder and seems to be a bit loose. The problem is, the bolts spin freely and without knowing if they are supposed to be tight, I don’t know of this is normal or not. I’m thinking of stopping by a dealership and checking out a new one.
IMG_1913.jpeg
 
   / Loose draft control cylinder bolts? #2  
Those bolts just put some preload on the spring. Basically, you hold it with the flat head screw driver and tighten the nut with a wrench till it's just snug without any play.

Maybe this picture helps you understand a little bit better what's going on:

1721395357071.png
 
   / Loose draft control cylinder bolts?
  • Thread Starter
#3  
Thanks, I figured it was something like that but I didn’t want to screw something up without knowing what the normal tension was, I’ll try to tighten them a bit before I go back to work
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2014 Volkswagen Passat TDI SE Sedan (A50324)
2014 Volkswagen...
JOHN DEERE CP 770 (A53084)
JOHN DEERE CP 770...
2015 GMC Acadia SLT1 SUV (A50324)
2015 GMC Acadia...
2008 MAGNUM TRAILER LIGHT TOWER TRAILER (A52472)
2008 MAGNUM...
 
Top