Loose 3pt lever on L245

   / Loose 3pt lever on L245 #1  

RMEADOWS

Bronze Member
Joined
Mar 26, 2002
Messages
85
Location
Lakeland, Fl
Tractor
MF 1428
My tractor sat for about 3 months (I know, a sin) and when I went to use it, the 3 pt adj lever would not stay in place. If I did not have it against the stop nut, the lever would vibrate and start dropping the implement.

And ideas what would be causing this?
 
   / Loose 3pt lever on L245 #2  
i dont know sorry but mine also drops by itself and i will be watching this post
mine has done it for as long as i have owned it
 
   / Loose 3pt lever on L245 #3  
I have an L2201DT and it's the same as the L245. I think there is a double nut on the shaft that the arm attaches to . Just loosen the outer , tighten the inner and then tighten the outer back up again. Very easy. It has been a while since I did this so it may be slightly different then I described , but it is very easy to fix. I'll look in the book this afternoon and be sure. I'll let you know if it's different then I described.
 

Tractor & Equipment Auctions

RAKE ATTACHMENT FOR MINI EXCAVATOR (A53843)
RAKE ATTACHMENT...
RAKE ATTACHMENT FOR MINI EXCAVATOR (A53843)
RAKE ATTACHMENT...
John Deere 5090E Tractor with Loader Prep Package, 2 Rear Remotes, Warranty Until 2028 (A53473)
John Deere 5090E...
UNUSED 10PCS Industrial Polyester Lifting Straps (A53117)
UNUSED 10PCS...
2009 Kaufman Gooseneck Trailer and 10K Hydro-Blast (A50860)
2009 Kaufman...
2019 MACK P164T DAYCAB ROAD TRACTOR (A51406)
2019 MACK P164T...
 
Top