Looking to identify what hose I need to get

[Andrewnyc]

Hello, I have an Allmand 425 and need to replace a leaking left side stabilizer hose. it measures 30” from end to end of the bolts with the flair, and has an outer diameter of about 19/32”.
They are 3/4 “ wide bolts, and there sides are 11/16” long. The metal jacket along the ends is 1-3/8” long. Any assistance is appreciated .
thanks,
Andrew

 

[setxjeff]

Your going to have to take it off to determine if it’s npt or jic fittings. Just remove it and take it to a hydraulic shop or anywhere that make hydraulic hoses, it looks like standard fittings probably 3/8 jic as a guess.

 

[seville009]

Agree with setxjefff above - most large truck shops have a full size hydraulics shop that can make you a new hose if you don't have a tractor repair shop near you.

 

[Andrewnyc]

Ok thanks I’ll take it off in a few and post pics because I have to order it

 

[Andrewnyc]

Ok so it appears to me it’s a bi hose - female to female straight crimped jic 37 degree sae 3000 psi I plan on putting the protector over it - the right way this time- the original didn’t hit the right point.
anything else I need to know?

one think if I kook into the fitting in the hose direction where it is crimped, it looks like it’s 1/4 “ I assume that’s normal.
appreciate any input
thanks
Andrew

 

[WranglerX]

The two files may help you...

 

[Andrewnyc]

Thanks for the help On the hose