Looking for work light power plug location.

   / Looking for work light power plug location. #1  

90cummins

Veteran Member
Joined
Mar 17, 2011
Messages
1,189
Location
Florida Ma.
Tractor
Ford 1720 SSS 4x4 Turbo Charged
Adding work lights to my ZD 1211.
There is a circuit in the fuse box (With no fuse installed) for auxiliary lights but I can not find the pigtail.
Does anyone know where it may be tucked away?

Thanks
90cummins
 
   / Looking for work light power plug location. #2  
Could it be that there is no pigtail. That you must plug into the back of the fuse box with the "appropriate" plug.
 
   / Looking for work light power plug location. #4  
I don't know your tractor. On the newer L series Kubota tractors it's tucked under the right rear fender. You must look carefully as it's easy to overlook. I believe on other models it's under the left rear fender. Or, as the guys suggested, you may need to run a wire. If you can find a parts diagram it may show the work light and where it connects.
 
   / Looking for work light power plug location. #5  
The WSM was not much help, but it does say the wiring should be Red with a Green stripe. The OEM lights Mount on the rops, so I suspect the majority of the wiring comes with the lights as opposed to being tucked away on the machine like on the tractors.
Start at the fuse box and see if you can trace a Red / Green wire.

I mounted lights on my ZD326, but used the brute force method and ran my own wiring. I put them on the front axle pivot cover, and they work very well there.
Good luck, and be sure to report back!
 
   / Looking for work light power plug location.
  • Thread Starter
#6  
I found the pigtails.
It is wrapped in blue tape behind the left rear wheel.
It looks like there is one on the right side in same position also in blue tape.

Thanks
90cummins
 
   / Looking for work light power plug location. #7  
I found the pigtails.
It is wrapped in blue tape behind the left rear wheel.
It looks like there is one on the right side in same position also in blue tape.

Thanks
90cummins

Yes then under seat add a fuse in the work light spot. It comes with no fuse installed
 
   / Looking for work light power plug location.
  • Thread Starter
#8  
PHP:
6748EF2B-0E45-4350-9327-82BFA2CDC2EE.jpeg6748EF2B-0E45-4350-9327-82BFA2CDC2EE.jpegEDCFCECA-9FD5-47CA-9F34-EB540530FF0E.jpeg2069E451-7EC4-4096-BAA0-80CE95B0D4C2.jpeg
As mentioned I found the power for auxiliary lights and I finished the installation of two LEDs in the front and one in the rear.
I have not used them outside yet but they throw decent light in the garage.
The charging system capacity is only 15 amps so I check the current draw which was 5 amps.
Looking forward to mowing in the evening.

90cummins
 

Tractor & Equipment Auctions

2023 Case IH 4412F 12 Row 30 In. Row Spacing Folding Corn Head (A50657)
2023 Case IH 4412F...
KLEEMAN MS192 MOBILE SCREEN (A51242)
KLEEMAN MS192...
2018 INTERNATIONAL 4300 24FT NON CDL BOX TRUCK (A51222)
2018 INTERNATIONAL...
1972 Ford F600 Grain Truck (A51039)
1972 Ford F600...
2013 Ford F-150 XLT - EcoBoost, Blown Engine, Good Parts Truck (A51039)
2013 Ford F-150...
PLEASE CHECK BACK!!! ITEMS BEING ADDED DAILY!!!! (A50774)
PLEASE CHECK...
 
Top