looking for rare metric bolts

[Jrasband]

Need m14 x 1.25 structural bolts. I need 8 at 50 mm and 8 @ 75 mm, does anyone know where I can find them? Search engine is not turning up much except euro wheel lug bolts. This is to replace the bolts that mount the front frame and loader to the engine block on my LS XG3032

 

[dodge man]

Did you try an LS dealer. I needed a bolt for my JD, larger metric than the hardware store had. The JD had it, of course it cost 4 times what it should have.

 

[alexpops]

fastenal?

 

[Jrasband]

I plated the original frame due to it cracking almost in half and putting a small crack in the block. Seemed to be underbuilt

 

[Jrasband]

fastenal?

They are not available on the website, same goes with every other website I have searched.

 

[Hoss710]

MSC industrial. they have a online store.

 

[Hoss710]

what grade are you looking for? 8.8 10.9 ? 12.9 ?

 

[Eagle1]

Bolt Depot Metric hex bolts, Zinc plated class 10.9 steel, 14mm x 1.5mm x 75mm - Bolt Depot

Metric hex bolts, Zinc plated class 10.9 steel, 14mm x 1.5mm x 50mm - Bolt Depot

 

[Jrasband]

what grade are you looking for? 8.8 10.9 ? 12.9 ?

8.8 or 10.9

 

[Jrasband]

Bolt Depot Metric hex bolts, Zinc plated class 10.9 steel, 14mm x 1.5mm x 75mm - Bolt Depot

Metric hex bolts, Zinc plated class 10.9 steel, 14mm x 1.5mm x 50mm - Bolt Depot

that is 1.5 mm thread I am looking for 1.25

 

[Jrasband]

MSC industrial. they have a online store.

Thanks, I requested a quote to se if they are available.

 

[Hoss710]

ok no luck on mac or McMaster Carr.

 

[Jrasband]

ok no luck on mac or McMaster Carr.

yeah no luck with them so far

 

[flyerdan]

Are you sure it's 1.25 pitch? Most metric fine thread in that diameter is 1.50.

 

[Jrasband]

I will double check that they are in fact 1.25 pitch, thanks.

 

[Eagle1]

OK try Hex Bolts 10.9 Full M14X1.25 Extra Fine DIN 961

Not sure if they have you lengths but they carry 100mm

 

[NoTrespassing]

Fastener Supply | Metric Fasteners Distributor | Eurolink

Eurolink Fastener Supply is the nation’s leading source for locating and delivering hard-to-find metric fasteners manufactured to both DIN & ISO standards.

eurolinkfss.com

Eurolink is the premier US distributor of metric fasteners and specializes in complimenting and extending your basic fastener lines with hard-to-find metric fasteners manufactured to both DIN and ISO standards. As the nation’s leading source for hard-to-find metric fasteners, Eurolink offers access to more than 100,000 quality C-class parts from countries such as Germany, Italy, Switzerland, Poland, Spain, France, and Great Britain. Regardless of your required size, material, or finish, Eurolink has the European resources to meet your demands.

I haven't used this company.

 

[NoTrespassing]

OK try Hex Bolts 10.9 Full M14X1.25 Extra Fine DIN 961

Not sure if they have you lengths but they carry 100mm

$44.99, how many do you suppose that's for?

 

[Jrasband]

Yeah seriously, at 16 that would be insanely expensive!

 

[Eagle1]

Yup but you wanted the impossible... seems like there is next to nothing in extra fine threads in M14.