Long 2360 FEL connection

   / Long 2360 FEL connection #1  

avarageerod

New member
Joined
Sep 2, 2013
Messages
15
Location
NC
Tractor
1993 Long 2360
I recently installed a front end loader on my Long 2360. I currently have it connected to the rear remotes and keep the handle tied back, which works fine, but do need my remotes for other implements. How can I connect my FEL to the tractor hydraulics without using the rear remotes? I have seen the pump that bolts onto the back and runs off the pto, but I would assume that you have to have a external reservoir for that to work. I know it can be done, but wanted to ask before I started tapping into hydraulic lines. Any help would be appreciated.
 
   / Long 2360 FEL connection
  • Thread Starter
#2  
bumping up my old thread. I still haven't changed my connection points, but thought i'd ask again.
 
   / Long 2360 FEL connection #3  
I know this is an old thread. Did you get your FEL connected?
 
   / Long 2360 FEL connection #5  
Was going to help out if he still needs the help. My 2460 has the 1550C on it.
 

Tractor & Equipment Auctions

2004 TRAILKING 101" X 53' STEP DECK TRAILER (A50459)
2004 TRAILKING...
(INOP) 2005 JCB 506C TELESCOPIC FORKLIFT (A50459)
(INOP) 2005 JCB...
John Deere 4520 Tractor (A50514)
John Deere 4520...
(2) ROLLS OF HD CHAIN LINK MESH WIRE (A50460)
(2) ROLLS OF HD...
2007 Ford F-150 Pickup Truck (A50323)
2007 Ford F-150...
1999 Ford F450 Dump / Plow Truck (A50514)
1999 Ford F450...
 
Top