Loader bolts on CK30HST

[HODAK]

Just did the 100 hour oil and filter change and checked all of the loader bolts among other items. The bolts located toward the front of the tractor right next to the oil filter were a little loose. All of the rest including the ones at the pivot points were good. The loader had some fairly hard use for about 50 of the 100 hours. Leveled many loads of dirt. Thanks Rick Wallace /forums/images/graemlins/smile.gif

 

[cag]

How about those wheel nuts, any loose there?I had 2 that loosen up on me, I keep an eye out every couple of hours...cag

 

[KiotiJohn]

I usually grease my loader after about 4 hours of use, and check the bolts at that time. Be careful not to overtighten some of the bushing bolts. I twisted one off the first time I retightened.

Bolts can sure loosen up with some of the hard work we do with these tractors.

It also it is a good idea to blow out your radiator and prescreen often too. Be careful not to use too high pressure when blowing around the fins.
John