lincoln sa200 continental engine ???????
- Thread starter Bladehauler
- Start date
- Views: 46542
OP
Bladehauler
Gold Member
Thanks SA!!
36 hp at 1450 !! quite a bit more than I anticipated !
might be around 40 hp at 1800, should be good for about 18kw, provided I can get it running to its full potential without breaking the bank !!
Thanks again!!
Scott
36 hp at 1450 !! quite a bit more than I anticipated !
might be around 40 hp at 1800, should be good for about 18kw, provided I can get it running to its full potential without breaking the bank !!
Thanks again!!
Scott
rjmack
Platinum Member
The next stuck engine I work on will either have a good dunk in molasses, or the bad cylinders filled up. I wouldn't be surprised if that outdoes every form of penetrating oil out there.
there are many videos online demonstrating how well it works.
there are many videos online demonstrating how well it works.
OP
Bladehauler
Gold Member
Well I pulled the head off it yesterday. all 4 bores look to be in good shape. 3 & 7/16 bore so it does seem to be a f162. I am able to spin it over by hand, it turns smooth though about 120 degrees , then gets notchy.I'm hoping it in the geartrain and not a spun bearing or ?????
