Have purchased LS 573 this year. Does anyone know if different size lift arm ball sizes are available? Tractor has 1" holes in current size but a lot of our implements use 3/4 size post to attach to. Most of our older tractors have 2 sets that can be switched.
You can get sleeves to reduce the size of the lift arm holes.
www.qualityfarmsupply.com
lift arm bushings and balls
www.qualityfarmsupply.com
GS650GL
Silver Member
- Joined
- Jan 16, 2024
- Messages
- 184
- Tractor
- LS XG3025, 1945 Farmall H, Farmall M, Mitsubishi MT2501D, Allis Chalmers B
You can get different size pins to put on your implements also, or just use adapter bushings as mentioned above. The easiest and least expensive way is to get a cat 2 to cat 1 adapter bushing kit. Your tractor probably has category 2 hitch and your implements have category 1. Category 1 has 7/8" lift arm pins and 3/4" top link pin. Category 2 has 1 1/8" lift arm pins and 1" top link pin.
Last edited:
Bobrown14
Gold Member
You have a cat 2 3pt hitch - when using cat 1 implements you can use the bushings above. That's what I use. Can purchase at tractor supply and get extra and while you're there get a few extra hitch pins.
