Leaking Hydraulic Cylinder

[c3racer2000]

I have a Satoh s650g from the early 70's with a National Snow Plow on it. The Hydraulic cylinder is leaking. Do anyone know who rebuilds theses or has a rebuild kit for one? Thanks

 

[PILOON]

In all probability your best bet is to simply replace with a new on with perhaps a little modification to adapt.You probably only want a single action one.
Try surplus center (they advertise on TBN) as they have good prices and often 'real deals'.

 

[Utah Bison]

I second Surplus Center.
I get all my Hydraulic hoses,cylinders and valves from them.

Lee

 

[lens12]

We can have most cylinders rebuilt. Even welded cylinders

 

[kennyd]

Find a local hydraulic shop and talk to them, take pictures or the cylinder and have them look at it.

 

[Kernopelli]

Agree on rebuilding.....cylinders are very basic in design and I have never seen one that couldn't be rebuilt due to seal failure. Unless you run across a truly smokin' deal on a replacement, I'd even go one step further......take that one apart, take the pieces or just the seals to a local hydraulic shop to match seals or match them up from seals available online and install them yourself. There's real satisfaction in doing it yourself, lots of online info on the subject and you'll know a little more about hydraulics when it's done.