LB1107

[Sheldon-Mel]

I have a LB1107 back hoe for my LS MT122 tractor. The rod ASSY-ends that join the joysticks to the hydro valves have ware out. Water has gotten in the boot and the actual bearings are gone from the ASSY ends. When looking for parts it appears like I have to buy the whole kit and not those individual parts. When I look at the LS parts catalog it looks like these are the same parts as used by the front loader joy stick (40540631 ROD ASSY-END-TRG822 and 40540630 ROD-END_BEARING-TRG822) Can anyone tell me if they are in fact the same parts used for both the loader and the backhoe linkage or if I can buy these parts separate from an actual kit for the backhoe?

 

[Eagle1]

Don't know about the LB1107 but I bought some replacements for my 1100 series BH on the XG3135 at Midwest Control Products
I used heim joints instead of rodends and studs but they fit and work perfect with just a minor mod to add flats 90 degrees out of stock.
There is thread in the LS forum that has the info for the parts, thread size, etc

The ball joints I used cost me 1.23 each (for 10) plus shipping, I like having spares