Landscape raking a gravel road & fixing a 3-point hitch to work with quick attach receiver

   / Landscape raking a gravel road & fixing a 3-point hitch to work with quick attach receiver #1  

MikeOConnor

Silver Member
Joined
Dec 16, 2002
Messages
173
Location
Western Wisconsin
Tractor
Two Power-Trac 1850s (preferred for mowing and grapple-bucket clearing type work on really steep hills). Kubota M680 for snowblowing, grading, bucket.
Landscape rake TBN splash.jpg


I had a pretty good time with my new landscape rake and decided to write a little post about it. The full post is here


Here are some highlights:

The bottom of the 3-point fit in the quick-attach after I bolted the riser bars on the inside of the bottom piece instead of the outside.

Slide8.jpeg


The top of the 3-point works with the top-hook of the quick-attach -- it can grab the top now that I've assembled it with the the bushings next to each other and the diagonal bar is far to one side instead of in the middle. Here are the instructions -- this will not work with the quick-attach because the diagonal bar in the center blocks the top hook.

Slide9.jpeg


Lots more detail about this in the post and the video. Your mileage will definitely vary, there's lots of small differences in the way that small-attachment 3-point hitches are designed. I didn't think to check before I bought the one I have and lucked out with this solution.

There's one pair of before/after pictures up at the beginning of this thread. Here's another one -- there are a lot more in the post/video.

Slide29.jpeg



Slide33.jpeg
 
 

Tractor & Equipment Auctions

2024 JOHN DEERE 6110M LOT IDENTIFIER 249 (A53084)
2024 JOHN DEERE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
1638 (A51247)
1638 (A51247)
2014 CATERPILLAR TL642C TELESCOPIC FORKLIFT (A51246)
2014 CATERPILLAR...
2002 Freightliner FL70 Elgin Street Sweeper Truck (A51692)
2002 Freightliner...
2020 CATERPILLAR 120 MOTOR GRADER (A51246)
2020 CATERPILLAR...
 
Top