rich3930
New member
john deere 510 backhoe, im lacking pressure on some of the cylinders on the hoe only. the front bucket works ok,
lack of hydraulic pressure
- Thread starter rich3930
- Start date
- Views: 1244
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
Everything else is OK? Steering, R/F shuttle? And it's just a problem with "some" of the hydraulic functions on the hoe?
If I had to take a "stab" at the problem - I'd be looking at the multi-function valve body for the hoe. Could be debris or inline gunk that's causing a loss of functional pressure in one or more of the valve circuits.
Isolate the hyd circuit to the valve and check the flow.
Good luck.
AKfish
If I had to take a "stab" at the problem - I'd be looking at the multi-function valve body for the hoe. Could be debris or inline gunk that's causing a loss of functional pressure in one or more of the valve circuits.
Isolate the hyd circuit to the valve and check the flow.
Good luck.
AKfish
Which functions on the hoe are weak? Each function has it's own relief valve. You could have a weak relief valve or two. Did the functions that are weak, all get weak at the same time? On those functions, do the cylinders leak down quickly/ If so you could have blown seals in the cylinders.
