kubotakid1
New member
could someone tell me what the weight of a LA402 loader is including the mounting hardware on a B7800
Last edited:
Loader LA402 Loader
- Thread starter kubotakid1
- Start date
- Views: 12878
ronjhall
Super Star Member
Height to what?
OP
kubotakid1
New member
to ronjhall
I didn't say the height but the weight
I didn't say the height but the weight
sawduster98
Silver Member
From my manual...
Net Weight Loader: 617lbs, bucket:180
Net Weight Loader: 617lbs, bucket:180
The manual lists the LA-402 weight as 617 lbs / 280 kg
It does not specify what is included in above weight.
In a separate spec. sheet it lists the bucket as 175lbs/ 79kg.
:laughing:sawdust beat me to it :laughing:
It does not specify what is included in above weight.
In a separate spec. sheet it lists the bucket as 175lbs/ 79kg.
:laughing:sawdust beat me to it :laughing:
OP
kubotakid1
New member
sawduster98 and easygo
Thanks so much for the info now I can calulate what weight of trailer I need to haul it
Thanks so much for the info now I can calulate what weight of trailer I need to haul it
ronjhall
Super Star Member
My sight must be going bad.
If the rear tires are loaded do not forget to add that too!!! The B-7800 has about 230lbs of beet-juice (rimguard) per rear tire.
A friend of mine almost ended up in a ditch trailering his L-4400. He added up tractor and loader weight but forgot about the loaded tires. Just the tractor and loader were around the limit for his pick-up and the additional 800-1000 lbs of liquid in the tires put it way over.
betennyson
New member
my float position does not stay in unless I hold it , is there a setting on the joy stick to cheeck?
ronjhall
Super Star Member
On back side of valve there is a cap. Remove the cap. Screw inside has probably come loose. Be careful to catch all the parts if screw has come all the way off. Check all linkage to make sure no other screws have come loose.
