L39 or JD 110 tlb
- Thread starter spo307
- Start date
- Views: 11324
-
- Tags
- john deere 110
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,419
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
jb -- Thanks.
There's a goodly number of "level-headed and sharp thinkers" hereabouts on TBN.
Maybe; just a little has rubbed off... over the past 4-5 years hangin' around here!?!
AKfish
There's a goodly number of "level-headed and sharp thinkers" hereabouts on TBN.
Maybe; just a little has rubbed off... over the past 4-5 years hangin' around here!?!
AKfish
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
It's true! I looked under the 110 and was just horrified! Going through high grass and getting a stump in there, would be a disaster of Titanic proportions! JD not making the skid plate standard equipment is just plain evil! Unless they have changed that.
No doubt about it. This is a 4000 series tractor! The front axle may be a beefed up version I recall. Oh yah, I almost forgot the little, tire valve protectors on this "INDUSTRIAL" tractor. The hood release mechanism
was really cheasy as well, for something supposed to be HD!
I agree what others say. I have owned many different size tractors, and something midsize in the 40HP range, 4WD, would be my best choice, if I could have only one. CUTS are a joke, for doing any serious digging! Or pulling out a stuck (to the axles) pick-up truck. I also agree that the CUTS (the old proven brands anyway) are on the expensive side.
No doubt about it. This is a 4000 series tractor! The front axle may be a beefed up version I recall. Oh yah, I almost forgot the little, tire valve protectors on this "INDUSTRIAL" tractor. The hood release mechanism
was really cheasy as well, for something supposed to be HD!
I agree what others say. I have owned many different size tractors, and something midsize in the 40HP range, 4WD, would be my best choice, if I could have only one. CUTS are a joke, for doing any serious digging! Or pulling out a stuck (to the axles) pick-up truck. I also agree that the CUTS (the old proven brands anyway) are on the expensive side.
