L3830 Rear Work Light Plug Location

Saxman · Oct 9, 2006

Hi All, I have a new L3830 and I am installing a new rear work light. I have found 2 plugs in the wiring harness on the right side near the hydraulic lift lever. Are these the factory plug(s) for the rear work light. The dealer told me they might be hard to find. Thanks in advance for the help.

_RaT_ · Oct 10, 2006

Saxman said:
Hi All, I have a new L3830 and I am installing a new rear work light. I have found 2 plugs in the wiring harness on the right side near the hydraulic lift lever. Are these the factory plug(s) for the rear work light. The dealer told me they might be hard to find. Thanks in advance for the help.

Down to the right and behind the PTO lever is a little clip with two conductors. That is the 12 volt power. Mine is green. I use it for my electric solenoids that swith the hydraulics on my power rake. You still need to switch it.

Saxman · Oct 11, 2006

10-4 buddy, I found it, thanks for the help. I would like to find a two prong plug that will mate to the one on the tractor to hook the light wire into. thanks again for the help

RFB · Oct 12, 2006

This thread may help:

http://www.tractorbynet.com/forums/...eed-electrical-help.html?highlight=work+light

_RaT_ · Oct 12, 2006

RFB said:
This thread may help:

http://www.tractorbynet.com/forums/kubota-owning-operating/88158-need-electrical-help.html?highlight=work+light

Thats great, I will now have to consider getting my one light hooked up. I welded mine too the rollbar, (don't start) I MIG'd it with a nice small weld, very cool temp so the rollbar won't collapse when the next owner takes possesion and flips it over.