L3830 Rear Work Light Plug Location

[Saxman]

Hi All, I have a new L3830 and I am installing a new rear work light. I have found 2 plugs in the wiring harness on the right side near the hydraulic lift lever. Are these the factory plug(s) for the rear work light. The dealer told me they might be hard to find. Thanks in advance for the help.

 

[_RaT_]

Hi All, I have a new L3830 and I am installing a new rear work light. I have found 2 plugs in the wiring harness on the right side near the hydraulic lift lever. Are these the factory plug(s) for the rear work light. The dealer told me they might be hard to find. Thanks in advance for the help.

Down to the right and behind the PTO lever is a little clip with two conductors. That is the 12 volt power. Mine is green. I use it for my electric solenoids that swith the hydraulics on my power rake. You still need to switch it.

 

[Saxman]

10-4 buddy, I found it, thanks for the help. I would like to find a two prong plug that will mate to the one on the tractor to hook the light wire into. thanks again for the help

 

[RFB]

This thread may help:

http://www.tractorbynet.com/forums/...eed-electrical-help.html?highlight=work+light

 

[_RaT_]

This thread may help:

http://www.tractorbynet.com/forums/kubota-owning-operating/88158-need-electrical-help.html?highlight=work+light

Thats great, I will now have to consider getting my one light hooked up. I welded mine too the rollbar, (don't start) I MIG'd it with a nice small weld, very cool temp so the rollbar won't collapse when the next owner takes possesion and flips it over.