bigiron1974
New member
Talking with a friend tonight. He said it wouldnt run a square baler. Will it?
L3400 will it run a square baler?
- Thread starter bigiron1974
- Start date
- Views: 3662
KennyV
Elite Member
- Joined
- Sep 1, 2004
- Messages
- 2,601
- Tractor
- Kubota L4200 GSTCA
If it could it would be marginal at best and I think it would shake the tractor to pieces... KennyV.
art
Super Member
I think it would be all that it could do and you wouldn't need but the smallest models.
Most of them will need a minimum of 35 PTO horsepower which would equate to about a 45 engine.
Most of them will need a minimum of 35 PTO horsepower which would equate to about a 45 engine.
RobJ
Elite Member
canoetrpr
Veteran Member
- Joined
- Aug 7, 2005
- Messages
- 2,396
- Location
- Ontario, Canada
- Tractor
- Kubota M7040 cab/hyd shuttle - current, Kubota L3400 - traded
I'd say it would be at the small side for a square baler. Just barely perhaps.
OP
bigiron1974
New member
You guys are probably right, but I am think I might at least give it a shot. Thanks for responding
NH-Rob
Gold Member
- Joined
- Feb 27, 2008
- Messages
- 319
- Location
- Northern NH
- Tractor
- Kubota B7510HSD(sold) B3200(new 6/15/09)
it is hard to believe it takes much hp to run a bailer but I think you need lots of wieght. When the plunger is moving it pushes the bailer back and forth and the tractor needs to take all this abuse.
Rob
Rob
