L3200 3rd function build

[Speedex]

1 12v 10gpm OC DA solenoid valve
9-6136 $128.15 ea
1 DO3 Subplate
9-5883-1 $35.95 ea
2 Hirschmann connectors
11-2457 $4.80 ea
3 JIC 8M x SAE 6M 90 elbow
9-6801-8-6 $2.40 ea
3 1/2" npt quick coupler
928 $17.95 ea
6 JIC 8M x 1/2 NPT connector
9-2404-8-8 $1.60 ea
3 JIC 8M x JIC 8F swivel 90 elbow
9-6500-8-8 $2.50 ea
1 JIC 8M x SAE 6M connector
9-6400-8-6 $1.50 ea
3 3/8" x 18" JIC 8F x JIC 8F Hose
931-2218 $10.95 ea
2 3/8" x 84" JIC 8F x JIC 8F Hose
931-2284 $20.95 ea
1 3/8" x 48" JIC 8F x JIC 8F Hose
931-2248 $16.95 ea
3 3/8" two wire clamp
9-A2-18-D $3.30 ea

Total $354.95

 

[Speedex]

John deere joystick ordered from greenpartstore.com
2 LVA12162 NUT $0.76 EA
2 37M7356 SCREW $0.82 EA
2 37M7355 SCREW $0.76 EA
2 21H1486 SCREW $1.10 EA
1 LVU16650 GRIP. $3.70 EA
1 LVU16701 GRIP $18.43 EA
1 LVA17501. WIRING HARNESS $53.77
TOTAL $79.34
It was around $6 to ship it. If anyone uses this be aware that the switches in this are only rated for 0.1 amps and the solenoid valve pulls around 3 to 3.5 amps. I had to solder new switches in finding out the hard way. I just used some automotive type relays and sockets I sourced from amazon. The relays actually pull more than the switch is rated for but I haven't had an issue as of yet. The relays seem to pull around 0.15 amps to engage them. I tested them all and installed the lowest of the bunch.

 

[Speedex]

 

[airbiscuit]

WOW! Very thorough. Thanks. You put a lot of thought into the design. Well done.