Kubota regened again today

[Slowpoke Slim]

Plus in our case it can go back to factory at anytime. I can do mine in about 30 minutes or less.

That's true. I did keep the parts. I certainly have no intention of putting it back, but if I ever trade it in, it would be nice to give the next guy the option.

 

[mcfarmall]

Mine regens about every 10-15 hours regardless of what speed I run the engine when working.

 

[CloverKnollFarms]

The nice thing is that the TYM and Bransons have a muffler available to delete the DPF and run like a pre emission diesel. Not possible on the CDI engines.

 

[Williy]

I have 118.8 hours and so far have 2 regens
also run at 1800 rpm's higher if PTO needed
Running low RPM's and lots of regens are you
really saving anything????

willy

 

[mike0000]

My first and only regen on my L3901 was at about 20 hrs. I had been running it like I had my old tractor (just added RPMS for the job at hand). I talked the regen over with my salesman and he said I should change my habits as far as the RPMS I was running. Since then after warmup I run the engine to at least 2k RPM or higher. I now have just over 51hrs, without a regen since the one @ 20hrs.

Mike

 

[kenmac]

read your manual. it will tell you where you need to have the RPMS.
You say it's a waste of engine life and fuel. You didn't understand this before you bought a tractor with emissions ?
not to mention, You live in a state that champions this sort of crap. Like banning the sale of gasoline vehicles

 

[scootr]

read your manual. it will tell you where you need to have the RPMS.
You say it's a waste of engine life and fuel. You didn't understand this before you bought a tractor with emissions ?
not to mention, You live in a state that champions this sort of crap. Like banning the sale of gasoline vehicles

I just asked a question BH. I'm not confused or crying and kicking on the floor. I'm looking for others experience with operating RPMs relative to regen frequency. If you can't be civil or Add something intelligent go home.

 

[scootr]

I just asked a question BH. I'm not confused or crying as you imply. I'm looking for others experience with operating RPMs relative to regen frequency. If you can't be civil or Add something intelligent go home.

 

[kenmac]

I just asked a question BH. I'm not confused or crying and kicking on the floor. I'm looking for others experience with operating RPMs relative to regen frequency. If you can't be civil or Add something intelligent go home.

Again, your manual will describe what you wanted to know....
if the truth hurts.. well.......
I'll go home

 

[scootr]

I really don't understand your attitude. It's a question.
Obviously you have nothing to add. Ignored.