Kubota rear wheels

/ Kubota rear wheels #1  

leoball

New member
Joined
Dec 25, 2013
Messages
14
Location
Logan, WV
Tractor
Kubota L3010
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
 
/ Kubota rear wheels #2  
More than likely it is a 170mm bolt dia (6.693") and has a 135mm center pilot hole (5.315"). Are you sure there not 6 bolt wheels?
 
Last edited:
/ Kubota rear wheels #3  
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
Contact Hey Wheel Co. HEY WHEEL HOME-WHEELS, RIMS, AIRCRAFT TIRES FOR AG USE.

They have everything. I bought new wheels to replace my industrial R series tires with Ag tires to conform to our planting widths. They sent me the rims then sent an invoice later. Nice folks .
 
/ Kubota rear wheels
  • Thread Starter
#4  
Hello all, I have a 2003 Kubota L3010 tractor -it has hoop type wheels on the rear-4 bolts and a deep offset (24 X W15L is stamped on the rim). The tire size is 420/70-24-- the center of the wheels are breaking and I would like to buy some rear wheels and tires. Contacted a wheel and tire place in Ohio and they advised its a metric bolt pattern and that I would have to buy from a dealer?
It is a six lug, 6 5/8" with a center hole of 5 3/8". It is a four wheel drive and the front tires are 16.5"
Would appreciate any guidance at all.
Thanks, Leo
304-687-2730
I found center disks at a Kubota dealer--thanks.
 

Marketplace Items

2018 GEHL RS5-19 GEN3 TELESCOPIC FORKLIFT (A65053)
2018 GEHL RS5-19...
2014 Ford Expedition SUV (A64557)
2014 Ford...
2022 Mac Trailers 48ft. T/A Walking Floor Trailer (A61573)
2022 Mac Trailers...
SURE FIRE 5.3GPM LIQUID FERTILIZER UNIT TOWER (A64278)
SURE FIRE 5.3GPM...
2018 Tycrop Vector Belt VB-16H Sand Belt (A64194)
2018 Tycrop Vector...
2014 KOMATSU PC170LC-10 EXCAVATOR (A65053)
2014 KOMATSU...
 
Top