Kubota M95 Hydraulic issues

[Bullseyefarms]

Hey all, looking for a little input here... Currently having hydraulic issues with my M95. When I activate any lever the system doesn't hold steady pressure. The steering feels sluggish, and I have no power going uphills. Already checked the quick connects, everything thing seems ok, fluid level is good, not foamy or aerated. Any suggestions/info would be greatly appreciated. Thanks in advance!

 

[K5lwq]

For the Hydraulic problem do you have a pressure gauge to check system pressure? If not, you should consider one as it will tell a lot about what is happening. Also has the filter been changed lately? If not I would start there. A common problem also is trash holding a relief valve open. Sometimes even a damaged O-ring on the relief can create a similar issue.

As far as losing power uphill I would think that is unrelated to the hydraulic issues. What happens when you lose power? RPM drops?

Hope this helps some and welcome to TBN!

 

[100 td]

When I activate any lever the system doesn't hold steady pressure. The steering feels sluggish, and I have no power going uphills.

Your tractor has 2 x hydraulic pumps, it "appears" ALL hydraulics are affected, as noted previously, filters would my first port of call, and suction line to pump, and possibly pump drive gear or spline.

 

[big bubba]

assume you have hyd shuttle? is it engaging fully in forward/ reverse? not sure this is your problem, but i've had to adj the hyd shuttle cable tension in the past. on one occasion had to replace a sticking hyd shuttle cable, but this may not be your problem. just a thought