Kubota brake safety switch

   / Kubota brake safety switch #1  

Mike1955

Platinum Member
Joined
May 21, 2022
Messages
550
Tractor
Kubota
On a zg222 it looks really difficult to change this brake safety switch. Anybody have any tips? Thanks in advance
 
   / Kubota brake safety switch #2  
Yeah, I’ve tackled that on a ZG222, trick is to remove the seat and rear fender for better access, then use a stubby screwdriver to reach the tight mounting screws. Patience and good lighting make all the difference!
 
   / Kubota brake safety switch #3  
Hire a contortionist with small hands
 
   / Kubota brake safety switch
  • Thread Starter
#4  
Yeah, I’ve tackled that on a ZG222, trick is to remove the seat and rear fender for better access, then use a stubby screwdriver to reach the tight mounting screws. Patience and good lighting make all the difference!
Thank you Kestrelrogers. I gave up. I left it where it was, cut the two wires and bought another limit switch. I mounted it where it would work from the thing that hit the other one. I works good. It has to be released or the mower will go dead.
 
   / Kubota brake safety switch
  • Thread Starter
#6  
I defeat all those switches, A paper clip is your best friend.
This one cannot be defeated. Has to close to start the engine the open to continue running.
 
   / Kubota brake safety switch #7  
My JD tractor seats now has 3 wires & can’t be tricked like the old 2 wire safety switches :mad:

My KTM kickstand switch is the same 3 wire setup too.
 

Tractor & Equipment Auctions

2008 VOLVO EC460CL (A52472)
2008 VOLVO EC460CL...
VERMEER RTX 130 WALK BEHIND TRENCHER (A51242)
VERMEER RTX 130...
1972 Baker 30ft Pole S/A Towable Trailer (A51694)
1972 Baker 30ft...
JOHN DEERE 7300 LOT NUMBER 18 (A53084)
JOHN DEERE 7300...
JOHN DEERE HX14 LOT NUMBER 272 (A53084)
JOHN DEERE HX14...
WOODS DS8.30 LOT NUMBER 52 (A53084)
WOODS DS8.30 LOT...
 
Top