Kubota B7510

   / Kubota B7510 #2  
You realize this will depend on what you are cutting with it. That is, how thick and woody the brush is.
Cliff
 
   / Kubota B7510 #3  
If I recall correctly, the 7510 has 16 HP at the PTO.

Well, I ran a 60" (5 foot) Land Pride through some very thick brush...much of it was as tall as the tractor.

This was with a Deere 670 which has about the same horsepower as the 7510. I bought this Land Pride from a dealer who sells Kubotas. He did tell me they sold the 60" cutters with the 7500's. Now, that was a salesman, but he seemed pretty straight up. And the dealership, like many in PA, is looking for repeat business...very much a family type place.

If you use common sense, I think the 60" cutter will do you fine...it'll be slower going then with a 48" cutter, most likely. But if you're in thick brush, you'll be going pretty slow with either size cutter.

FYI, the 790 I have now doesn't do that much better then that 670...just recovers quicker when it bogs down...probably doesn't bog down as much as the 670 did.
 

Tractor & Equipment Auctions

2015 FREIGHTLINER CASCADIA DAY CAB (A51219)
2015 FREIGHTLINER...
2019 CATERPILLAR 308 CR EXCAVATOR (A51242)
2019 CATERPILLAR...
CAT FORKS W/ QUICK COUPLER (A50854)
CAT FORKS W/ QUICK...
2007 WABASH 53FT DRY VAN TRAILER (A51222)
2007 WABASH 53FT...
Kinze 840 Grain Cart (A50514)
Kinze 840 Grain...
2003 Pierce Fire Truck (A50323)
2003 Pierce Fire...
 
Top