Kubota B2320 and Land Pride Rtr 1250 Compatability

Kubotaboy33 · May 21, 2018

Looking at purchasing Rtr 1250 for my Kubota B2320 anyone have any experience with pairing these up? Kubota specs say that the max weight for a tiller is #430 and the rtr 1250 comes in at #435 anyone think this would be a major issue?

ryan08 · May 21, 2018

There are several videos of people with "B" series tractors using this tiller on youtube. Must work well....

Kubotaboy33 · May 21, 2018

Thank you, I’ve seen that on YouTube too. Was just curious about the spec issue, I might be getting caught in the weeds on the details. Just want to make sure I’m not going to mess up my tractor by only going over #5 over max weight for a tiller. As I’m sure you can guess I’m a bit of a novice when it comes to tractors and impelements.

ryan08 · May 21, 2018

I think Kubota is conservative on their specs as I have a chipper that is beyond 3 point weight and it has not proven to be a problem at all. Five pounds is nothing.....go for it.

diesel85 · May 21, 2018

I run a Woodmaxx 62" flail mower on a BX2200 that weighs approx 650# and a 50" snowblower that weighs about 600#. The BX2200 is rated for ~800# at the eyelets, and ~650# 24" behind the eyelets. Both implements work extremely well on this tractor.

A B2320 should hold 1356# at the eyelets, and 1058# 24" behind.

You are well within the specs of a B2320. That tiller would probably work fine on my little BX, but I'd have to go slow in the rough spots.