Kubota 7510 remotes

[PSDawg]

I am installing remotes on my 7510 and need to know what size 'T' fitting is required for the tank fitting when adding a new valve. Thanks.

 

[MadReferee]

The tank end is 3/8" NPT. I believe there is an adapter in there when the loader valve connects directly to it. The adapter will be 3/8" NPT male to 3/8" JIC male. The loader hose is 3/8" JIC. At least that is the way it was on My B2710.

 

[PSDawg]

Thanks for the quick reply! Are all the other fittings JIC as well?

 

[askfortom]

Why are you putting remotes on your b7510? I was woundering because that might be something I need to do.

 

[PSDawg]

I am adding a hydraulic top link. I thought I was finished after I added a grapple and a 12V valve earlier, but this would really be helpful with the rear attachments.

 

[MadReferee]

Thanks for the quick reply! Are all the other fittings JIC as well?

The hoses to and from the block have JIC ends too.

 

[PSDawg]

Thanks. I should have the valve and top link today. I will post all the required fittings when I am done.