Hi folks..gravelman from So NH i have a Kodiak 60" heavy duty rotary cutter... i am unable to find replacement blades, there are two. This seems very strange to me not finding anyone with blades to fit. I have had it two years and this is my first time replacing blades. Any suggestions would be greatly appreciated. They are 24 1/2 " long, 4" wide and bolt hole of 1 1/8th i guess that is pretty much standard???
Kodiak mower blades..
- Thread starter gravelman
- Start date
- Views: 1610
Liquidsilver
Gold Member
Not sure about your specific model, but I was finding parts : HERE
You can also browse through Rotary Cutter Supply for the correct blades.
When I was getting blades for my Titan, I had to go through the Titan dealer to get them.
WD40 and a long breaker bar (and a helper) will be your friends. Good luck!
You can also browse through Rotary Cutter Supply for the correct blades.
When I was getting blades for my Titan, I had to go through the Titan dealer to get them.
WD40 and a long breaker bar (and a helper) will be your friends. Good luck!
Midniteoyl
Elite Member
- Joined
- May 20, 2013
- Messages
- 4,762
- Location
- N. W. Indiana
- Tractor
- Kioti CK3510SE HST, Ford 3400, Gizmow ZTR, Simplicity 7016H
What did you hit that is making you replace 2yr old blades?
LD48750
Veteran Member
Thats what I was wondering.
My brush hog is over 10 yrs old & I sharpened the blades once.
Midniteoyl
Elite Member
- Joined
- May 20, 2013
- Messages
- 4,762
- Location
- N. W. Indiana
- Tractor
- Kioti CK3510SE HST, Ford 3400, Gizmow ZTR, Simplicity 7016H
If the nicks are bad enough to worry about, grind them a bit. Lift it up, block for safety, then hit them with a grinder, making the same number of passes on both blades. No need to take the nicks completely out and you don't want lawn mower sharp blades anyways, keep them blunted.
Oh, and those blade bolts are on there to the tune of 650ft-lbs, so not the easiest things to change anyways
Oh, and those blade bolts are on there to the tune of 650ft-lbs, so not the easiest things to change anyways
3gunr
Veteran Member
- Joined
- Apr 17, 2018
- Messages
- 1,172
- Location
- wentzville mo
- Tractor
- mahindra 2538 mahindra 2810 cub cadet 7260 massey 255
I have 2 brush hogs that are 20 plus yrs old , original blades , as others have said ,touch em up with a grinder and you are good to go, If you just have to replace i believe agri supply sells kodiak mowers.
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,107
- Tractor
- Outlander max 1000 6x6, Ego lawn mower
I agree that its OK to have spare blades around but like others have mentioned, changing them is a pain in the %$@(! I'd sharpen them in place and $10 says they'll still be balanced.
