Loader KL401 Loader help

[84SCRAMBLER]

I broke my loader mounting arm and found out it had been broken before and a previous owner had removed the torque trailing arms. I had run it for a couple years without these and I知 sure this is why it broke again! I may try to fab them vs. buying. Can anyone with a DK/KL401 measure the cross section height and width on the trailing arms that go from the loader mounting bracket to the rear? Also I can稚 quite see where the rear of the trailing arms bolt in if someone could snap a picture that would be greatly appreciated.

 

[84SCRAMBLER]

Here is a picture with the parts I am referring too highlighted. I know its a pretty big ask to go crawling around under your machines in winter, hoping someone has one in a heated garage