Batche33
Silver Member
I'll let Derek (if he wants to) post the problem (fix) after Eric talks to him Wednesday
Becky
Becky
KL120 FEL only lifting up 1 foot...
- Thread starter Dmace
- Start date
- Views: 2937
Batche33
Silver Member
Tractors on her way back home.
MotorSeven
Elite Member
Uh oh, do we smell "operator error"......... /forums/images/graemlins/shocked.gif
Wheew, better him then "us" /forums/images/graemlins/grin.gif
RD
Wheew, better him then "us" /forums/images/graemlins/grin.gif
RD
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 15,804
- Location
- Big Island, HI
- Tractor
- LS XR4140H (Mine) BX2380 (wife’s)
Well, I for one, sure know THAT feeling /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
DAvid
DAvid
Batche33
Silver Member
I can't really say that it was operator error.
Since he's never taken the loader off, it wasn't really his fault.
The problem was one of the quick couplers on the loader wasn't completely coupled.
Once the couplers were completely connected he could carry on with his Kioti chores.
(sorry about the alliteration, I couldn't help myself /forums/images/graemlins/smirk.gif)
Since he's never taken the loader off, it wasn't really his fault.
The problem was one of the quick couplers on the loader wasn't completely coupled.
Once the couplers were completely connected he could carry on with his Kioti chores.
(sorry about the alliteration, I couldn't help myself /forums/images/graemlins/smirk.gif)
OP
Dmace
Elite Member
Yeah, I am a little concerned that this coupler just came off like that. These things shouldn't just pop off, but at least now I know what to look for if it happens again.
At least I can get back to work this weekend. /forums/images/graemlins/cool.gif
At least I can get back to work this weekend. /forums/images/graemlins/cool.gif
Steve_Miller
Veteran Member
If I had a guess, I'd say that it was probably never completely seated from the begining. Unless there is enough play in the coupling to allow the fitting to become unseated. Anyhow if it does it again you know what to look for and secondly you can replace both ends as they are probably defective somehow or other. Oh yeah, glad to hear your back in business. Great service as well from your more than competent dealer. /forums/images/graemlins/cool.gif
Steve
Steve
I've actually had a coupler come disconnected while working in the woods. It's amazing how many pins, and that quick disconnect that have been robbed from tractor while working. The limb has to get just right to do one of the QDs, but it's possible!
John
John
bncsauve
Silver Member
And, the award for "BEST REMOTE TROUBLESHOOTING" goes to ...... Bluechip.
