I have an imatch on my 3520 and am considering a KK 60" tiller. Does anyone have this combo and does the KK mount up to the iMatch? I think the KK is the best value as far as tillers but would really like something that works with my quick hitch.
KK tiller and iMatch?
- Thread starter jmt1271
- Start date
- Views: 1512
cast_and_blast
Platinum Member
Looks like "Backup" had success with a 60" mounted seamlessly on his 2305 with iMatch. The thread is here:
http://www.tractorbynet.com/forums/jd-owning-operating/95732-60-tiller-2305-a-2.html
Scott
http://www.tractorbynet.com/forums/jd-owning-operating/95732-60-tiller-2305-a-2.html
Scott
Yep, I hooked up the 60" KK perfectly with iMatch, no modifications required. The PTO shaft is actually extended a few inches from its shortest possible length on my 2305. The PTO shaft has a slip clutch too, seems like a good piece of equipment.
wippster
Member
jmt1271 said:
why not a 72"KK on 3520?? plenty of HP
radman1
Elite Member
- Joined
- Jul 8, 2006
- Messages
- 3,017
- Location
- midwest
- Tractor
- JD 4520, Toolcat 5610, Bobcat S300, Case-IH 125 Pro, Case-IH 245, IH 1086, IH 806
My 72" KK tiller will not work with my Speeco quick attach. The lift pins on the tiller are too close to the tiller frame and won't allow the hooks of the quick attach to clear. It needs about 1/4 more clearance. My tiller is about 5 years old. Maybe the design has changed. Maybe the JD imatch has slightly thinner hooks and does work. It is possible the 60" version is different in design than the 72".
