KIOTI NX LED lights/bulbs

[NWKIOTI]

Looking to replace the current headlight bulbs with LED, and the front and rear lights of the cab with LED lights. Does anyone know which bulbs I would need for the front head lights and which LED work lights will match current housing with no modifications.
Not looking for light bars.

Thanks

 

[WranglerX]

Take bulb out and read what the rating of bulb is (probably in wattage) and the should be a number like "XY123" or what ever is on bulb... There is many cross reference charts that will have alphanumerical number of a incandescent bulb on one side of chart and the LED equivalent on other side....

Might start at someplace like here...

LEDtronics, Inc.

www.ledtronics.com

Or Maybe...

https://myrvworks.com/wp-content/uploads/2019/04/LED-Incandescent-Bulb-Crossreference.pdf

 

[NWKIOTI]

Take bulb out and read what the rating of bulb is (probably in wattage) and the should be a number like "XY123" or what ever is on bulb... There is many cross reference charts that will have alphanumerical number of a incandescent bulb on one side of chart and the LED equivalent on other side....

Might start at someplace like here...

LEDtronics, Inc.

www.ledtronics.com

Or Maybe...

https://myrvworks.com/wp-content/uploads/2019/04/LED-Incandescent-Bulb-Crossreference.pdf

Thanks!
My tractor is at my property 300 miles away, figured I would get everything ordered ahead.

 

[5030]

Not a clue but both my M9 Kubota's are 100% LED. One thing to be aware of and that is, your hazard flashers may or may not flash with LED bulbs especially if the flasher unit is mechanical. If it's solid state, it will work.

I get all my LED's from SuperbrightLED

 

[D&D]

Looking to replace the current headlight bulbs with LED, and the front and rear lights of the cab with LED lights. Does anyone know which bulbs I would need for the front head lights and which LED work lights will match current housing with no modifications.
Not looking for light bars.

Thanks

If you figure it out......The worklights are a halogen bulb arrangement with a glass lens/reflector.

Lighting upgrade?

Had some time today so went to look at upgrading the cab lights. I have some 6” leds and the housing looked similar in size. Took the Kioti light off and pulled the bulb assembly out to see if I could swap the guts. Found something else very interesting (IMO), the base of the bulb is stamped...

www.tractorbynet.com

 

[Fallon]

I'd remove the whole housing & replace with a LED pod. LEDs emit light differently than a halogen bulb so focus suffers putting a LED into a halogen socket. LEDs need to run cooler, so have much bigger heating on them. You can find a pair of pods everywhere for $40-50 or so.

 

[RjCorazza]

I agree that replacing the housing is best. I never had acceptable results using led bulbs in an OEM housing.
I have 2 front, 2 rear 55w combo flood / spots on my tractor and they turn night into day.