3-Point Hitch Kioti Lk3054 3pt. hitch capacity please

[ron45]

I'm looking at a Land Pride RB3772 rear blade. I weighs 640 lbs w/added hydraulic cylinder. Will my three point hitch lift it w/o getting a hernia?

Thanks for your time.

 

[Jimbrown]

My LK 30 is 2150lbs I would expect the 3054 to be close to that if not higher.

 

[ron45]

Thank you that's good news. Do you know if that number is based on the 24" figure?

Ron

 

[4570Man]

Your tractor lifts 2,150 at the pins. It should be able to lift a 700 pound blade.

 

[ron45]

Thanks I was wondering about the distance from the pins. Could you please tell me where you got you information.

I did not see it on my owners manual specifications page. Need to check again. Everyone seems to know this but me.

I appreciate your help.

Ron

 

[k0ua]

Thanks I was wondering about the distance from the pins. Could you please tell me where you got you information.

I did not see it on my owners manual specifications page. Need to check again. Everyone seems to know this but me.

I appreciate your help.

Ron

Tractor data just lists at the pins. it would be somewhat less at 24 inches, but I would bet over 1500 still.

TractorData.com Kioti LK3054 tractor information

 

[ron45]

Thank you very much. 4570 man. `used to have one of those. Wish I still did. That sounds like the info I was looking for. Would you please tell me where you got that info.

I didn't see it in the specification page my the owners manual. I will look again.

 

[ron45]

James I missed your post last time around or it just came up. Thanks very much for the info. I just noticed your links.

Wish I could buy you and espresso next time you are in Central New Mexico.

Ron

 

[k0ua]

James I missed your post last time around or it just came up. Thanks very much for the info. I just noticed your links.

Wish I could buy you and espresso next time you are in Central New Mexico.

Ron

Ron, I haven't been to New Mexico for several years, but I do appreciate the thought.

 

[4570Man]

Thank you very much. 4570 man. `used to have one of those. Wish I still did. That sounds like the info I was looking for. Would you please tell me where you got that info. I didn't see it in the specification page my the owners manual. I will look again.

Tractordata.com. It is my favorite site for finding tractor specs. Way easier than going through the manufacturers forty pages of crap.