5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Certainly can and not hard to replace either.
Kioti DK6010 clunking
- Thread starter future_vision
- Start date
- Views: 2931
OP
future_vision
Gold Member
Where can I find instruction on how to replace them?
grsthegreat
Super Star Member
Are you sure the loader brackets are all tight? I get clunking if i say…. Harrowing in the field with loader attached. I generally drop the loader when doing field work such as spraying, harrowing, etc.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Not a clue but all they are is a rubber bushing with a trhrough bolt.
Midniteoyl
Elite Member
- Joined
- May 20, 2013
- Messages
- 4,764
- Location
- N. W. Indiana
- Tractor
- Kioti CK3510SE HST, Ford 3400, Gizmow ZTR, Simplicity 7016H
Did you double check the loader bracket bolts?
In fact, I would double check every bolt and pin I could find.
In fact, I would double check every bolt and pin I could find.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
One thing I do with my FEL attachment bolts is I apply Loctite to them and then torque to specification, just for insurance, I paint mark them so I can see if they have backed off at all. Do the same with the lug nuts on the wheels.
