forester2
Gold Member
72" is actually easier because you can drive right over it. I have a 60" so I have to raise the front end which is easily done with the fel. One of the rear casters is turned and locked in place so with the front 2 casters you can roll the unit around. I didn't like that so I welded up a dolly that slides under the rear of the deck giving me swivel wheels on all 4 corners so it is very simple for me to roll the deck anywhere. Drive shaft is a simple snap coupling, front mount is a lever that the front bar mounts into and rear is 2 spring loaded pins. Have the dealer show you; it's simple and strudy. The other nice thing about the mmm is the edge of the deck is very visible from the cab when you're trimming. Again, if I was brush cutting I'd want it on the 3pt for the reason you stated but for reg. mowing, I like underneath.
