KAMA 354C Parts?

MrFixit · Nov 22, 2009

It's been a couple years since I broke my 354C so I haven't logged onto Tractorbynet. Well I broke my tractor and need parts. I checked Chip's website (Previous KAMA Expert!) and they don't sell KAMA anymore.

Is there anybody stocking parts for KAMA tractors? I need a steering arm (Again).

Tim

greg_g · Nov 22, 2009

But he still stocks parts. Refresh my memory as to the problem though. I ask, because I have one too - and am not sure what you mean by "steering arm". What page and part number(s)?

//greg//

Affordable · Nov 22, 2009

Give Chip a call ,he has some Kama parts and can also still get them from the factory

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

MrFixit · Nov 22, 2009

Thanks Tommy!

Greg, page 29 & 30 of my manual has P/N 254.31M.168. for Right Arm which I need now. I broke the left one in 06 that P/N is 254.31M.167.

The front end of my tractor is not designed for the the 600Lb Grapple and logs I stuff in it. So most likely you won't experience the same failures as me.

Tim

greg_g · Nov 22, 2009

Ah, the arms themselves. That's surprising, I think they're forged. I'm guessing then that the outboard weight of logs rocks the front end back and forth, overbalancing the load from side to side. On the bright side, at least you won't tip over that way.

And you're right. I haven't carried anything heavier than a 5' bucket full of rip-rap, and on soft ground at that. Where I direct my attention is to the linkage itself; greasing regularly, and checking often that all the jam nuts are still tight.

//greg//

bluechip · Nov 22, 2009

MrFixit said:
It's been a couple years since I broke my 354C so I haven't logged onto Tractorbynet. Well I broke my tractor and need parts. I checked Chip's website (Previous KAMA Expert!) and they don't sell KAMA anymore.

Is there anybody stocking parts for KAMA tractors? I need a steering arm (Again).

Tim

Still here, still know a little about KAMA tractors and still have lots of parts!