K&M mechanical seat upgrade on MX5200

[nicb803]

Finally decided to upgrade the seat on the new MX. Back was taking a beating and taking days to recover after any extended amount of time on the tractor. If you are contemplating a seat upgrade, quit procrastinating and do it. The difference in ride and comfort are night and day, your back will thank you. A few hundred bucks is cheaper than a chiropractor or surgery any day! Took almost 2 hours for the install, but there was an issue with the mounting plate not aligning correctly. Instead of returning I decided to just drill another hole since only 1 hole was off. Do not hesitate to ask questions if you need, very simple and you will not regret the change, just regret not doing it sooner!!!

 

[Kernopelli]

Congratulations on this upgrade. I recently put one on my Deere z930 for the same reason and what a difference in comfort it has made!! I was worried the limited travel wouldn't really provide a noticable difference or if the springs would provide enough compression damping for 200+ lbs operator. I am well pleased on both accounts and would recommend this upgrade to anyone seeking more comfort!

 

[FatTire]

Maybe post a model # and photo of the seat you used? Might save someone some time if they want go a similar route.

 

[nicb803]

Maybe post a model # and photo of the seat you used? Might save someone some time if they want go a similar route.

136 Uni pro seat with Grammer MSG65 mechanical suspension kit.