Just another junk chainsaw

   / Just another junk chainsaw
  • Thread Starter
#2,422  
M18, works really well for me to get into a mass to the branches.
Dad got a Kobalt battery polesaw he likes.

My gas one that extended to like 16' could get heavy to me over time.
 
   / Just another junk chainsaw
  • Thread Starter
#2,423  
Comparing oem and clone tensioner set ups. 2511

e2511ttt.jpg
e2511tt.jpg
 
   / Just another junk chainsaw #2,424  
One of my favorite saws I carry around with me in my jeep and on the tractor is a Poulan 25 Antivibe I bought in 1978 Ithe only thing I have had to do other than normal bar and chain maintenance is thanks to alcohol in the gas I had to replace the gas line and after that I started using non-alcohol fuel I help maintain our snowmobile trails here in Southern NH
 
   / Just another junk chainsaw
  • Thread Starter
#2,425  
I had a bunch of those 25 and S25. I sold them all off to collectors.
One guy bought like 6 of them. Shipped in one box and all made it south.

I bought the later micro version that replaced those in 94 and still have it too.

p25cc.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#2,426  
Unlimited coil installed. goofing off with 20"

I have 16" 20 " 24" 32" 42" in this mount. 😁

g312020.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#2,427  
I just received a down payment on the 5200. So it is SOLD but pending till paid in full.


Last of the USA made 85cc I have.

p5200zxxxx.jpg
 
   / Just another junk chainsaw
  • Thread Starter
#2,428  
Nice specs and tuning info from echo on that 3510 I am getting dad for Christmas. CS-3510 - MODEL INFORMATION

Hope to be able to get it to him early to replace that 180 easy start I gave him years ago.

Will need tuned for our area compared to out west elevations it is coming from. So will get to check it out once arrives.

e3510x.jpg
 
   / Just another junk chainsaw #2,429  
Nice specs and tuning info from echo on that 3510 I am getting dad for Christmas. CS-3510 - MODEL INFORMATION

Hope to be able to get it to him early to replace that 180 easy start I gave him years ago.

Will need tuned for our area compared to out west elevations it is coming from. So will get to check it out once arrives.

View attachment 3657566
One of these came up for sale by me yesterday for $75 and has been used once according to the guy. Thought about picking it up.
 
   / Just another junk chainsaw
  • Thread Starter
#2,430  
Echo 3510. I priced them new retail for $299 shipped or in store. Military discount $269 shipped.

Guy I deal with just took one in used with low use just needed a new b+c he said. He muffler modded it too. Which I hope isnt to loud for dad.
He didnt care for my ported 7900 with muffler mod when I ran it. Also did care for the MS290 I gave him with muffler mod.
That was way back and he liked his Poulan 3300 better.

But anyhow that guy been buying the crap out of those Farmertec 2511 clones and modding them. Egan pipe and some ported.
So he cut the used 3510 out of his stable and shipped to me. :cool: 😁 👍

Egan pipe was made for OEM so the clones cover has to be opened up.

jc2511eganpipee.jpg
 

Tractor & Equipment Auctions

2021 Fleco DX140 24in Tooth Bucket Excavator Attachment (A49461)
2021 Fleco DX140...
Ford Super Duty 4x4 Pickup Truck Bed (A49461)
Ford Super Duty...
2014 KENWORTH T800 SLEEPER CAB (A50854)
2014 KENWORTH T800...
RIMS AND TIRES (A50854)
RIMS AND TIRES...
2012 MACK CHU613 (A50854)
2012 MACK CHU613...
2006 CHEVROLET SILVERADO 4X4 PICKUP TRUCK (A51222)
2006 CHEVROLET...
 
Top