5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Where on earth did you get that pristine Craftsman at?
Just another junk chainsaw
- Thread starter xyz123
- Start date
- Views: 593705
Estate sale. Wife passed and the older husband selling off everything.
Beautiful in town home with heated garages. Probably only used for yard work on tree limbs or ER times.
cqaigy2
Super Member
Wow very clean. What year was the newspaper?
It's next. Been dealing with this 2095 that got same day.
Well the paper under that Craftsman 3.7 wasn’t that old. 2009 local paper.
Still had a unsharpened Oregon 76 3/8 chain for back up and a 1/3 used 76 still on it in good shape.
Cool part on the 50/50 drawing I see here. It was the thin ring 3700 topend.
When I seen that bare piston without seeing ring yet I knew.
Still had a unsharpened Oregon 76 3/8 chain for back up and a 1/3 used 76 still on it in good shape.
Cool part on the 50/50 drawing I see here. It was the thin ring 3700 topend.
When I seen that bare piston without seeing ring yet I knew.
That super clean 61cc thin ring was only kept spotless outside.
You need to get under them covers cleaning folks. Around flywheel and cylinder fins etc for cooling.
Still had the black duckbill for tank vent.
When I touched it before pic it just smeared goo.
You need to get under them covers cleaning folks. Around flywheel and cylinder fins etc for cooling.
Still had the black duckbill for tank vent.
When I touched it before pic it just smeared goo.
Eagle1
Epic Contributor
- Joined
- Jul 4, 2003
- Messages
- 26,844
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
Pretty much how far they go apart for cleaning once I put one on the bench for any reason. Still too long between cleaning sometimes. Guilty as charged.