Joystick Help

[welderboy14]

Hey,
i need a little help figering what port is the inlet and what one is the outlet Heres a picture,

Thanks for any Help

 

[oldnslo]

Can you provide pictures of the other faces of this valve? I see a P & T on the view but would not want to hazard a guess on which ports they are from the picture you provided.

Roy

 

[kennyd]

P= Pressure, or IN
T=Tank or OUT

 

[welderboy14]

P= Pressure, or IN
T=Tank or OUT

Ok thanks Kenny

 

[wdchyd]

P= Pressure, or IN
T=Tank or OUT

:thumbsup:....also notice the relief valve in lower right on picture is on the pressure/in side

 

[welderboy14]

:thumbsup:....also notice the relief valve in lower right on picture is on the pressure/in side

O ya i for got about the relief valve:laughing: , i guess i sould ask now how to set it to the right PSI relief

 

[kennyd]

After you get the valve all hooked up, you will attach a presure gauge (0-3000PSI) to one of the work ports-then activate the joystick to energize that port. The PRV (pressure relief valve) setting will be indicated on the gauge.

 

[welderboy14]

After you get the valve all hooked up, you will attach a presure gauge (0-3000PSI) to one of the work ports-then activate the joystick to energize that port. The PRV (pressure relief valve) setting will be indicated on the gauge.

Ok, thanks kenny for your help