Johnny D got a little work out today

[ducati996]

Nice looking rig, but why/who routed the hydraulic hoses below the right step and sticking out right in front of rear tire like that? You may want to rethink that set up.

Good eye - and you are correct

Should be tucked in much more -

 

[Chris2520]

Well , after yall gave me a hard time about my loader hoses being twisted backwards. . I fixed it. i knew it was not right.
the guy that put that mess together must have been a moron.....
all the 45 degree ends were put on to face away from the tractor.
I took all the loader hoses off , i dont mean unhooked. i mean i unbolted them . took them off out of the weave. stratened them all up . put them in the right order. and put the weave back on. and reinstalled everything. it was alot of work... But now there nice and strate running perfect right beside the floor boards. and hoses are nice and even. I am pretty **** about things. if its not perfect , it ant worth doing...

here is the pics of the hoses fixed . i pulled the weave back a little on the top of the loader. i wanted to be able to see the fittings. if i ever had a leak.
tell me if it looks right now.

 

[B8FISH]

Ahh--much nicer looking. And from another **** retentive person--I always connected the plastic caps above the hoses so that they wouldn't get snagged on stuff while bushogging etc. Figured that sooner or later one would get wrapped in a vine or something and get ripped off.

 

[Chris2520]

That sounds like a good idea....

 

[BenderKC]

Ahh--much nicer looking. And from another **** retentive person--I always connected the plastic caps above the hoses so that they wouldn't get snagged on stuff while bushogging etc. Figured that sooner or later one would get wrapped in a vine or something and get ripped off.

Boy there are some sharp dudes keeping us all in line on this board. Extremely valuable for those of us in the lower part of the class.